My KR-2S is in the shop wiht the wings off. You would need 87 inches. I have the new Great Plains short block installed and had it running. Now I am building a new cowling since I move the engine ahead 8 inches to overcome a CG problem. If it works out I will have a cowling and a Great Plains 5 point engine mount for sale. Joe Weber Cuba City, Wis. ----- Original Message ----- From: "Mark Langford" <n5...@hiwaay.net> To: "KRnet" <kr...@mylist.net> Sent: Tuesday, June 27, 2006 10:04 PM Subject: Re: KR> One minor dimension
> Red wrote: > >> My question is...What is the distance from the outer >> stub wing to the other side... under 7' and it's a GO > >>From memory, I think the main spar is 84" (7 ft), and then you have the > WAF's hanging out about 2" on each side, so I think you're sunk unless you > shorten the spar, which would increase loads on the joints somewhat. > > Mark Langford, Harvest, AL > see homebuilt airplane at http://www.N56ML.com > email to N56ML "at" hiwaay.net > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
