I cut a 3/16 notch in the bottom corner of each internal spar wood spacers. Then after spar inspection when I capped the spars I placed a 3/16 piece of rope into the notch the whole length of the spar. When the epoxy was no longer runny I pulled the rope out giving me pressure release and moisture drainage. A bit over kill, but for an hour's extra work it's done for all 6 spar pieces.
Rick Hubka r...@hubka.com http://www.hubka.com/kr_main.htm -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of bdazzca...@aol.com Sent: Monday, May 22, 2006 1:30 AM To: kr...@mylist.net Subject: KR> holes in spars Hi, I was wondering if you are suppose to drill holes in just the center spars or all spars inner and outer? David Swanson bdazzca...@aol.com _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
