Then get more, Virg On Mon, 8 May 2006 20:21:06 +1000 "Chris Johnston" <chr...@ozdocs.net.au> writes: > My plans BOM and spruce kit show for the centre spar vertical > pieces 1 x > 1/2 x 2 5/32 x 30 inches, and 30 inches is not enough as far as I > can > tell???? > > > > > Chris Johnston > > > North Richmond > > > Australia. > ----- Original Message ----- > From: <bdazzca...@aol.com> > To: <kr...@mylist.net> > Sent: Monday, May 08, 2006 2:14 PM > Subject: KR> spar wood > > > Hey guys, Since I dont have a set of plans, can anybody tell me what > wood I > > would need to order to build a set of KR2S spars - The center ones, > front > and rear. The only difference is that they will be 10 feet long - > the > outboard spars will be standard length. I plan to build the 18% new > airfoil > so > will be 8" tall I believe. I hope to order the wood for the center > spars > within > the next month or two but need the info. I have a set of stock spars > to get > > some of the measurements as far as spacing from. Thanks.....Bill and > 41768 > > - 330 hrs and counting... > > Bill, > > I believe the front inboards are total 2" tall by 2 5/32" > wide then > your 10' times this by 2 for top cap and bottom. The inner pieces > are 1/2" > by 2 > 5/32 by 60". Your outboard front is 2" tall by 1'' wide by your 10' > again > times that by 2 for top and bottom caps. The inner pieces are 1/2" > by 2" by > 72" > and 3/4" by 3/4" by 72". Center rear spar is > > > 2 pcs 2" x 2 5/32" x 10' center forward spar > 1 pcs 1/2" x 2 5/32 x 60" center forward spar vert pcs > 2pcs 2" x 1'' x 78" outer front spars > 1pcs 1/2" x 2" x 72" outer front spar vert pcs > 1pcs 3/4" x 3/4" x 72" outer front spar vert pcs > 2psc 2" x 1" x 10" rear center spars > 1pcs 1/2" x 1/2" x 36" rear center vert pcs > 1pcs 1/2" x 1" x 60" rear center vert pcs > 4pcs 1" x 7/8" x 79" outer rear spars > 1pcs 1/2" x 1" x 60" outer rear spar vert pcs > 1pcs 1/2" x 1/2" x 60" outer rear spar vert pcs > > The kr-2s printout from AS says 42" on the last two but I found out > that I > needed more when i built mine so I added the extra that I needed to > finish. > I am > actually building all my spars right now so I found out the hard way > that I > needed more material to finish them:). If anyone finds a mistake in > my > little > list please correct it for Bill. I would hate for anyone else to go > through > having to buy MORE wood cause you didnt get enough to begin with. > > David Swanson > bdazzca...@aol.com <boat done on with the spars> > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
