Brian,
If there is any chance of getting the drawings, sure would like to
have them. Don't know what I need to do exactly yet, but I don't think
this retract is going to be happy on my gravel strip. Bobby
> They are cast from Diehl, assuming you are referring to the Diehl ones.
>
> I do have drawings for a set I made. They were plasma cut, machined,
> welded, and heat treated. I changed the angle about 5 degrees to give me
> more prop clearance and made them taller for the new airfoil spar. I also
> have a set of lower 4130 brackets I made and blank uncut material for the
> legs so I can change the angle that the gear goes forward. All done I
> have
> probably twice what a stock Diehl package costs in it, but there are some
> things I wanted to try to improve landings.
>
> Brian Kraut
> Engineering Alternatives, Inc.
> www.engalt.com
>
> -----Original Message-----
> From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
> Behalf Of bo...@hatconversions.com
> Sent: Sunday, January 22, 2006 10:29 AM
> To: kr...@mylist.net
> Subject: KR> Gear leg brackets
>
>
> Does anyone have a print for a gear leg bracket, or are they cast units we
> have to buy? Bobby.
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
