Thanks Mark I still need to figure out the hose size and connectors but I noticed this pro lite hose is much lighter then steel braid hose. That shound be great.
Jeff York KR-2 Flying N839BG Home page http://web.qx.net/jeffyork40/ My KR-2 http://web.qx.net/jeffyork40/Airplane/ to see my KR-2 Email jeffyor...@qx.net ----- Original Message ----- From: "Mark Langford" <n5...@hiwaay.net> To: "KRnet" <kr...@mylist.net> Sent: Sunday, January 08, 2006 4:21 PM Subject: Re: KR> remote filterconnections > Jeff York wrote: > > > Also, I want to replace the oil lines on my remote filter. I want to get > rid of the household style plumbing elbows and automotive hose clamps and > replace with AN style hose fittings. I am sitting here at home and I can not > remember the hose sizes and am not familiar with AN connector sizes. Any > help?< > > I used Earl's Pro-Lite 350 hose and other AN-6 fittings from Earl's. Their > catalog is at > http://www.holley.com/index.asp?division=Earls and everything you'd need is > in there.. You can either buy these fittings from your local speed shop, or > somewhere on the web such as DCI in Atlanta, at phone number 404-522-3497. > There are a few details on the oil system at > http://home.hiwaay.net/~langford/corvair/oil_system/ , but I didn't go so > far as labeling all the fittings. > > Mark Langford, Huntsville, Alabama > see KR2S project N56ML at http://home.hiwaay.net/~langford > email to N56ML "at" hiwaay.net > -------------------------------------------------------------- > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
