That's what I needed. Thanks. Looks like they have a ton of good stuff. Brian Kraut Engineering Alternatives, Inc. www.engalt.com
-----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of jscott.pi...@juno.com Sent: Sunday, November 27, 2005 6:19 PM To: kr...@mylist.net Subject: Re: KR> pipe thread plug http://www.bakerprecision.com/adapt6.htm the fourth fitting down the page. Jeff Scott On Sun, 27 Nov 2005 17:50:38 -0500 "Brian Kraut" <brian.kr...@engalt.com> writes: > Does anyone know where I can buy an NPT pipe thread hole plug with a > hex > socket head? I have seen them in aluminum cettified parts before, > but > Spruce and Wicks only have the square head type and I need one that > will not > protrude from the hole. I can get them in brass with a socket head > from the > hardware store, but for this application I really want them in > aluminum. > > Brian Kraut > Engineering Alternatives, Inc. > www.engalt.com > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
