Steve, It is almost impossible to find 6061-T6 in T-bar. Especially in 1" required for the rudder and elevator horns. I bought some at the local Ace hardware where you can get it in three foot lengths. It is not 6061 but it has shown no signs of wear after 70 flight hours. No need to flame me guys for using something other than 6061. If you are afraid to use it, then don't. It is your decision. Check your local Ace Hardware stores.
Mark Jones (N886MJ) Wales, WI Visit my web site: http://www.flykr2s.com Email: mailto:flyk...@wi.rr.com -----Original Message----- From: krnet-bounces+flykr2s=wi.rr....@mylist.net [mailto:krnet-bounces+flykr2s=wi.rr....@mylist.net]On Behalf Of Steven Phillabaum Sent: Thursday, November 03, 2005 7:02 AM To: kr...@mylist.net Subject: KR> Aluminum T stock Hello net, This is for those whom built there Hinge system using Dr. Deans Hinges. I am looking for a piece of T stock for use in the Dr. Dean hinge control horn. I made mine out of channel but did not permanently attach it. I would like to use the correct item. I have searched the archieve and found a reference to McMaster but they sell it in 8 foot length. and, it is 1.5" by 7/8". Guess I could use the leftover as another sanding stick. I already have sanding sticks and don't want anymore. But I wonder if anyone has a section they could put in the mail and send to me. In the rigging stage of the fuselage and my procrastination is going to catch up with me. I need to mount my Horizontal Stab. Steven Phillabaum KR2S; 5048; corvair; Auburn, Alabama _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
