Ron and All Thank you all for your kind suggestions. It has been very helpful. I have found a source of Gorilla Polyurethane glue and have ordered some! Thanks All Peter ----- Original Message ----- From: "Ron Eason" <r...@jrl-engineering.com> To: "KRnet" <kr...@mylist.net> Sent: Tuesday, August 16, 2005 2:58 PM Subject: Re: KR> Epoxy
> Gorilla is another manufacture of this product. Any product that says it's > Urethane. > Ron > ----- Original Message ----- > From: <mikensandys...@aol.com> > To: <kr...@mylist.net> > Sent: Tuesday, August 16, 2005 8:28 AM > Subject: Re: KR> Epoxy > > >> Peter, I've contacted Elmer's and was only able to leave a message on >> their >> phone answering machine. They have a terrible web site in regards to >> their >> information about distribution. I think as big a product that Elmer's has >> been >> here it surely should have an outlet there. If I get a response from them >> I >> will pass it on to you. This glue has great gapping qualities and >> holding >> power >> for foam to foam and foam to wood or even foam and wood to metals. It is >> however considered non structural. >> _______________________________________ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> please see other KRnet info at http://www.krnet.org/info.html >> >> > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > --- > >
