Make the top and bottom widths the same, no bananna boat, Virg On Tue, 19 Jul 2005 7:44:05 -0400 Steven Phillabaum <skp...@charter.net> writes: > Hello net. > You will have to have your plans out for this one. > > I have a question about the Longeron Doubler at the fire wall. The > plans show the first Longeron planned to match the 1/4" shelf and > filler block. Also shows the Doubler beveled to match the angle of > the first Longeron. > > 1. Is the first longeron beveled the entire length? > 2. Then is the Doubler beveled to match the angel of the side of the > Longeron? > 2. Is this the way you did it? > 3. Can I just glue the Doubler to the longeron and only bevel the > portion of them both that will be involved with the shelf area? > > The book shows what looks like a KR1 with almost straight sides and > states just to glue on the doubler. The Plans drawing B shows the > bevel situation. Note I have widened my fuselage to be 44" and have > a stock firewall. Talk about a Banana boat. > > > Steven Phillabaum > KR2S; 5048; corvair; > Auburn, Alabama > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
