Phil,
The WAFs are not sorted yet.
I received a half set of WAFs from the US ("RR genuine parts"), which I am
not going to use, because the holes are not exactly located as mine.
I also ordered some 4130 steel of the correct width from the States,
enough to do a complete set of WAFs, which I should receive anytime now.
In the meantime, I have cleaned all my WAFs, and drilled the lightening
holes as per plans (they were all 1/2"). I might simply finish these
(paint with Zinc chromate primer), because the local authorities are
getting nervous with my building frenzy!
But there is still a pair of WAFs I want to redo, because the attachment
hole is oversized, and I don't like that.
Cheers,
Serge
"Phillip Matheson" <mathes...@dodo.com.au>
Envoyé par : krnet-boun...@mylist.net
2005-07-16 07:38
Veuillez répondre à KRnet
Remis le : 2005-07-16 08:23
Pour : "KRnet" <kr...@mylist.net>
cc : (ccc : Serge VIDAL/DNSA/SAGEM)
Objet : Re: KR> 4130 steel
Serge
How did you go with the WAF?
I ordered cut 4130 from a aircraft supplier in Australia, then just cut
then
to length, cleaned them, and drilled them.
Phillip Matheson
mathes...@dodo.com.au
Australia
VH PKR
See our engines and kits at.
http://www.vw-engines.com/
http://www.homebuilt-aviation.com/
See my KR Construction web page at
http://mywebpage.netscape.com/FlyingKRPhil/VHPKR.html
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
