Pat
It wont be a problem to have the scarfs all at the same end and location but 
if you are not convinced of this, simply put two at the front end and two at 
the rear. And if you fail to remember this when gluing up,...DO NOT fret. It 
truly doesn't matter. As you progress, you will see so much being glued to 
these longerons to further strenghten them.
Pat Russo
----- Original Message ----- 
From: "Pat Driscoll" <patric...@usfamily.net>
To: "KR Net" <kr...@mylist.net>
Sent: Tuesday, June 14, 2005 11:36 PM
Subject: KR> Start Building


> OK Netters, I am now ready to start building. I finally got my work bench 
> cleared of all the junk and got my plans laid out. I took a 2" x 6" x 
> 13'1" stick of Sitka spruce down from the rafters where it has sat since 
> 1976. I had varnished the ends real well and there was no checking on 
> them. I now have to cut this into strips and get started. I guess the 
> first thing I'll have to due is order some T-88 from Wicks.
>   I will also have to splice the longerons because the plans call for 14'. 
> Question is, should I cut at different stations on all four or can I add a 
> piece at the same stations on top and at a different station the bottom. I 
> don't think I want to have all the additions lined up with each other.
>   By the way, I don't want all of you to be crying in your adult beverages 
> but I only paid $1.50 per board foot for the Spruce.
>   Now I guess I'll have to try to set up a web site somehow,(not my 
> expertise). I'll let you know when and where.
> Pat Driscoll
> Saint Paul, MN
> patric...@usfamily.net
> Don't let them tell you the sky's the limit.
> Mans footprints are on the moon
>
>
> --- http://USFamily.Net/dialup.html - $8.25/mo! --  
> http://www.usfamily.net/dsl.html - $19.99/mo! ---
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html 


Reply via email to