Serge,
I made my own wing attach fittings from the material you describe below
and I got it from Aircraft Spruce. Just be careful when you drill cut or
grind. that you do not heat the metal and thus spoil or change the temper.
The process will take a lot of time but considering the price of ready made
WAF's, it's worth it unless you are wealthy it's a good way to go.
Bob Stone Harker Heights, Tx
rsto...@hot.rr.com
----- Original Message -----
From: "Serge VIDAL" <serge.vi...@sagem.com>
To: <kr...@mylist.net>
Sent: Monday, June 06, 2005 2:38 PM
Subject: KR> 4130 steel
> If I buy strips of 4130 steel of the correct thickness from Aircraft
> Spruce, can I use them as they are to make WAFs, or is there any treatment
> (other that surface treatment) that I must apply?
>
> Serge Vidal
> KR2 "Kilimanjaro Cloud"
> Paris, France
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
