Yes with the proviso that the carby is vented to the ram air intake (has the
same pressure).
What normally may be vented on a carby
a) the float bowl.
b) a vacuum operated slide like on a Bing.
c) a diaphragm on a Mikuni.
(there may be more, they are just the ones I'm familiar with)
If the vent is not at the same pressure as the carby throat's intake then it
will probably run lean or even stop fuel flow at high speeds.
regards
Barry Kruyssen
Cairns, Australia
RAA 19-3873
k...@bigpond.com
http://www.users.bigpond.com/kr2/kr2.htm
----- Original Message -----
From: Phillip Matheson
To: KRnet
Sent: Thursday, June 02, 2005 10:31 AM
Subject: Re: KR> Ram Air systems
Thanks for the replies
BUT no one has been able to answer my question ?
Can ram air system be used on a normal Carib system that DOES NOT have a
mixture Control set up ???
Phillip Matheson
mathe...@dodo.com.au
Australia
VH PKR
See our engines and kits at.
http://www.vw-engines.com/
http://www.homebuilt-aviation.com/
See my KR Construction web page at
http://mywebpage.netscape.com/FlyingKRPhil/VHPKR.html
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
