Has there ever been a firewall separation issue with any KR out there? Al ----- Original Message ----- From: "Doug Rupert" <drup...@sympatico.ca> To: "'KRnet'" <kr...@mylist.net> Sent: Wednesday, April 13, 2005 6:36 AM Subject: RE: KR> heavy engines
> Mark I fail to see where that 40 pounds will make much difference in the > firewall area since the mount you have is six point (2 extra thru > underside > of boat) unless very high G maneuvers are a common occurrence. What if > anything have the "Sube" guys been doing to their firewalls to accommodate > all that extra weight they are carrying around? Since most builders have > placed foam insulation on the inside between stringers for sound deadening > it would be a simple matter to place a layer of glass over that to make > the > whole front end one composite sandwich. A layer of Kevlar would be even > better for it's increased tensile strength as well as exceptional > vibration > deadening qualities. My opinion only. > Doug > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.9.7 - Release Date: 4/12/2005 > > > > -------------------------------------------------------------------------------- > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.8 - Release Date: 4/13/2005
