As best I understand it, Bubba is correct. VE resin and PE resin use the same catalitic process and will cure hard either in a mold of when coated with PVA to eliminate air from the surface. Once cured, the PVA scrubs off easily. I use scotchbright and water. All of those Diehl wing skins flying on KRs are VE Resin.
-- "Bubba" <mystic...@swbell.net> wrote: jscott.pi...@juno.com wrote: > VE resin should work fine for that. The strength qualities are > similar to epoxy. Final sanding can be a bit more difficult, which > is why I think most KR builders would build this part with Epoxy. If VE is anything like PE, spray it with PVA after the layup is finished and it'll cure hard and sand way easier. -- Steve N205FT mystic...@swbell.net He who seeks will find, and he who knocks will be let in. _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
