Pat, It is very simple, mount the engine mount to the firewall. Next, mount the Diehl nose wheel bracket to the firewall. Then weld two supports from the nose wheel bracket to the engine mount tray. The pictures on my web site will tell the story. Here is the link. http://mywebpage.netscape.com/n886mj/mount.html Also, before mounting the Diehl nose wheel bracket to the firewall, cut off the two brace arms from the bracket as you will be replacing those with new ones. Simple as that.
Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: <cowgirl2...@aol.com> To: <kr...@mylist.net> Sent: Monday, January 10, 2005 9:29 PM Subject: KR> Nose gear / Corvair eng mount > Ok guys here's another question > > I'm building my engine mount for my KR2 with a Corvair Eng. I was told I must > make some changes to the mount for the diel nose gear to attach My manual > doesn't cover this can anyone help > > Thanks again > Patricia >
