I snapped off a rudder pedal and almost took out some lights at the end of the runway in a KR once. Turned out to be a bad weld in the 5/8" pedal tubing. It only had about 50% penetration. It didn't fail in over 100 hours because the previous owner did not have the hydraulic brakes with the brakes on te rudder pedals. I am all for going extra beefy on the rudder horns.
Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-bounces+brian.kraut=engalt....@mylist.net [mailto:krnet-bounces+brian.kraut=engalt....@mylist.net]On Behalf Of jsmon...@aol.com Sent: Tuesday, December 28, 2004 7:12 PM To: kr...@mylist.net Subject: Re: KR> trim cable/ control surface loss Rudder horn could take quite a bit of stress if you had toe brakes and really mashed down on the pedals, thinking you were on the brakes. John Monday KR2S Laguna Beach, CA _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
