----- Original Message ----- From: "VIRGIL N SALISBURY" <virg...@juno.com> To: <kr...@mylist.net> Sent: Tuesday, November 16, 2004 4:23 PM Subject: Re: KR> Re: Facets / Vaccum/ Pulse pumps
> My 10Hp generator has such a set up , 4 stroke, Virg > > On Tue, 16 Nov 2004 12:11:07 -0500 "Fritz" <reds...@epix.net> writes: >> >> ----- Original Message ----- >> From: "Phillip Matheson" <mathe...@dodo.com.au> >> To: "KRnet" <kr...@mylist.net> >> Sent: Sunday, November 14, 2004 6:26 PM >> Subject: Re: KR> Re: Facets / Vaccum/ Pulse pumps >> >> >> > >> > On Large ride on Mowers and certain Machinery you find a fuel pump >> that >> > works on a diaphragm and works on the crank case pulse, a hose >> from the >> > crank case to the pump mounted on the side of the engine ?supplies >> a pulse >> > to operate these pumps. >> > Would something like this work instead of a engine driven fuel >> pump ( >> > for >> > those engines not fitted with a engine pump) with a facet as a >> back up for >> > Take off / land or emergency>?? >> > >> > >> > Phillip Matheson >> > mathe...@dodo.com.au >> > Australia >> > VH PKR >> > See our engines and kits at. >> > http://www.vw-engines.com/ >> > http://www.homebuilt-aviation.com/ >> > See my KR Construction web page at >> > http://mywebpage.netscape.com/FlyingKRPhil/VHPKR.html >> > >> As far as I know you only have a crankcase pulse on a 2cycle >> engine, >> not a four! >> KR-2 in N.E PA. >> > >> >If you have a 4 cyl.engine without a vented crankcase,it's a pretty good bet you will push oil out of your crank seals or worse. >> > Fritz>> > >> > >> > _______________________________________ >> > to UNsubscribe from KRnet, send a message to >> krnet-le...@mylist.net >> > please see other KRnet info at http://www.krnet.org/info.html >> > >> >> >> _______________________________________ >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> please see other KRnet info at http://www.krnet.org/info.html >> >> > > > Virgil N. Salisbury - AMSOIL > www.lubedealer.com/salisbury > Miami ,Fl > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
