MEK is ok but Lacquer thinner is ok also, it has MEK in it. It removes oils and cleans the surface.
KRron ----- Original Message ----- From: "Kenneth B. Jones" <kenbjo...@cinci.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Friday, July 02, 2004 9:53 PM Subject: Re: KR> Fiberglass Solvent > I use E-Z Poxy on my White Lightning. I'm told to sand the surface and to > wipe with MEK prior to applying epoxy. > > > ----- Original Message ----- > From: <jehayw...@aol.com> > To: <kr...@mylist.net> > Sent: Friday, July 02, 2004 9:32 PM > Subject: KR> Fiberglass Solvent > > > > Anyone know of a solvent that I could wash/wipe a cured fiberglass surface > > with to remove the sheen so epoxy would adhere? I'm making a fiberglass > gear > > leg for my Challenger ultralight and need to epoxy 3 short tubes together, > one > > inside the other. I sanded the last set I made which worked well but was > a > > real chore for the inside surfaces of the mating tubes. Thanks.... > > > > Jim Hayward > > Rapid City, SD > > > > _______________________________________ > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
