1 I want to replace my pull pull linkage on my elevator, with a pushrod from the stick to the rear of the seat. To do this it appears that I will have to bore a hole through the main stub wing spar??
Take a look at: http://kr-builder.org/ElevatorControl/index.html I can measure the tube if you are interested in this approach. The hole is only in the web and does not cut through any of the important stuff. We actually used the same hole that the cables went through. 3. Antennas, where to put one? So far I think the best spot for mine right now is in the turtle deck cover, stuck to the inside. A/S sells a stick on antenna, has anybody tried to put on there?? On my first KR, I put the nav, com, and elt antenna ( self contained on the elt ) behind the seat on the floor. On this KR, Jerry thought ahead and put the nav in the wing. We were going to put the com behind the seat on the floor, but we made our seats and seat back of carbon fiber, so we are going with an antenna like Marty's mounted in about the same place. OH, and for the other question about aileron hardware, take a look at: http://kr-builder.org/Aileron/index.html about 4 pics down on the page. There is a time for building and a time for flying, and the time for building has long since expired. See N64KR at http://KR-Builder.org - Then click on the pics Daniel R. Heath - Columbia, SC See you in Mt. Vernon - 2004 - KR Gathering See our EAA Chapter 242 at http://EAA242.org -------Original Message------- From: KRnet List-Post: krnet@list.krnet.org Date: 05/23/04 16:10:56 To: KRnet Subject: KR> need more building info Netters, Thank you for the help and guidence that you have given up to this point. with the tail wheel and rear post of the fin. I combine 2 different ideas into one to come up with the answer. I will have photos of the end result later. I'm in need of some more Ideas and help. 1 I want to replace my pull pull linkage on my elevator, with a pushrod from the stick to the rear of the seat. To do this it appears that I will have to bore a hole through the main stub wing spar?? I will then have a horn behind the seat with a pull pull linkage to the elevator. How to put a hole in the spar, can I do that? What size pushrod? How long? 2. Next I need to see if anybody has photos of the baffeling for their 1835 vw. Do you need to vent or keep cool the fuelator? Ken R. had a problem of this once. 3. Antenas, where to put one? So far I think the best spot for mine right now is in the turtle deck cover, stuck to the inside. A/S sells a stick on antena, has anybody tried to put on there?? Lee Van Dyke vandyke5.com l...@vandyke5.com N783JB _______________________________________ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
