I guess I did not explain myself well enuf. I did not mean a parts list for the KR. I meant what is required (if there is a guideline) for hardware fittings on bell cranks, pushtubes, cables, etc. Regardless of the plane. So the inspector doesn't come in and say " you have to replace all these nuts with castles, those pins with bolts, ..." Thanks for the replies!
Steve McGee Endeavor Wi. USA Building a KR2S widened. lmc...@maqs.net ----- Original Message ----- From: <skp...@charter.net> To: "KRnet" <kr...@mylist.net> Sent: Sunday, February 22, 2004 8:58 AM Subject: Re: KR>Hardware list > > Is there a list or info page some where noting the hardware requirements (castellated nuts, pins, etc) on things such as push tubes, bell cranks, cables, etc???? > > > > Steve McGee > > Endeavor Wi. USA > > Building a KR2S widened. > > lmc...@maqs.net > > > Steve, > > I have a list of just such in an excell format. Just like the one I made for the aluminum that is posted on the archieve. It was made from plans "as plans". You would need to modify for your use. It lists each item and where it is to be used. If you would like I will send it to you direct. > > Steven Phillabaum > Auburn, AL > "Work Table Stage" > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
