Jack P/n 2A7 is for use with Capacitance gauges!!
Ron Freiberger mailto: rfreiber...@swfla.rr.com -----Original Message----- From: krnet-bounces+rfreiberger=swfla.rr....@mylist.net [mailto:krnet-bounces+rfreiberger=swfla.rr....@mylist.net]On Behalf Of Jack Cooper Sent: Monday, February 09, 2004 2:49 PM To: KRnet Subject: RE: KR>Fuel Gauge Dan I also have the J.C. Whitney senders mounted in the tank and a set of gauges that came with the senders. I would like fuel gauges to match my other engine instruments so I'm thinking of ordering P/N 2A7V pg 350 AS&S cat. I would think that any resistance gauge would work but there may be some calibration problem. > [Original Message] > From: Dan Heath <da...@alltel.net> > To: kr...@mylist.net <kr...@mylist.net> > Date: 2/9/2004 6:37:42 AM > Subject: KR>Fuel Gauge > > I have a fuel sender and gauge like you would buy at an auto supply store or > J C Whitney's. Of course the sender would be a little difficult to swap out, > but I am thinking of replacing the gauge. What do I need to consider to be > sure that I get one that will work with the sender? Or, is this something > that should not be done? > > > > See N64KR at http://KR-Builder.org - Then click on the pics > > > > Daniel R. Heath - Columbia, SC > > > > da...@kr-builder.org > > > > See you in Mt. Vernon - 2004 - KR Gathering > > > > See our EAA Chapter 242 at http://EAA242.org > > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html _______________________________________ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
