Sorry - forgot my sig line. Steve McGee Endeavor Wi. USA Building a KR2S widened. lmc...@maqs.net
----- Original Message ----- From: Steve and Lori McGee To: kr...@mylist.net Sent: Wednesday, January 07, 2004 7:46 PM Subject: Question for the mathmatically superior. This should trip some egos. OK here goes: 1- Main spars were built same length, not 1" shorter on front spar. ( not by me, though may have been by design) So we are starting out square. - remember the difference in wafs length off the outer spars. 2- Rear outer spars are built with thick blocks on each end to allow for trimming, as they will most likely be too long. 3- Distance between main spars 21.38 distance to be between them at wing tip 13.75 4- Main outer spar is 92.63 rear outer spar which can be trimmed is 94.63 Question - How long does my rear spar have to be, what is the angle of my rear spar, what are the angles to make the rear wafs to (#2 fitting and #3 fitting), what dimension from the bend line are my end mount holes? Whew - there now I owe a few beers to whoever can give me that. Probably someone with a cad system handy?
