I make this stuff I don't buy it, but you can buy just about any length, any cable type and any fitting combo that you can imagine pre-made. I will look up a good website and publish, I don't have one at my finger tips presently. Do you have a Fry's Electronics store in your area? Some are good and others are aweful, but it is worth a shot. I'm not a big fan of Radio Shack for pre-made cables, the construction seems to be sub-standard, ie, good for ground based radio work, don't know that I would fly with it! You can also go to any good magazine/book store and look for sales references in a copy of CW or some other Ham mag, there are several out there. Most have phone numbers and web sites and can be alot of help if contacted with specifics.
Denny ... Colin <crain...@cfl.rr.com> wrote: Ok Netters, Please help. I am stuck. Wiring is all complete for both radio and transponder and I am terrible at making the connections to the antennas! I have messed up 2 and that tells me to let someone else do it. Is there any source for pre-made cables in specified lengths, so that I can order a couple and have quality connections? I need both to have the 90 degree ends for the 2 avionics, and then one needs to have the BNC end for the transponder antenna, while the other I will cut off for direct connection to the antenna in the vertical stab. Thanks a million in advance. Colin & Bev Rainey KR2(td) crain...@cfl.rr.com http://kr-builder.org/Colin/index.html Sanford, Florida KR Gathering 2004-see ya in Mt Vernon_______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html --------------------------------- Do you Yahoo!? Free Pop-Up Blocker - Get it now
