Justin, That is not what you told us before. Previously, you said you varnished all the wood.
Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Justin" <jmw...@socal.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Tuesday, November 25, 2003 5:13 PM Subject: Re: KR>(Justin: try Spar lumber in Long beach). > Hey wise ass Daniel. My boat is NOT varnished on the outsides. I put tape > along the outside, varnshied the insides of it but not where glueing will be > done. Same for the HS stab, i taped the spar tops and varnished the middle, > 3 coats worth. > > I simply seen an ad for aircraft plywood, with that name in mind I gave > it a shot on the net to see if it would be good for the KR or not. Looks > like ill be putting on Bass wood, stronger,heavier but cheaper. > > Justin > N116JW > www.geocities.com/attngrabber14/Home > ----- Original Message ----- > From: "Dan Heath" <da...@alltel.net> > To: <kr...@mylist.net> > Sent: Tuesday, November 25, 2003 4:53 PM > Subject: KR>(Justin: try Spar lumber in Long beach). > > > I'll bet 1/8 will be too heave and 1/16 may be too weak. I believe that the > plans call for 3/32. Besides, Justin has already varnished his boat. > > N64KR > > Daniel R. Heath - Columbia, SC > > da...@kr-builder.org > > See you in Mt. Vernon - 2004 - KR Gathering > > See our KR at http://KR-Builder.org - Click on the pic > See our EAA Chapter 242 at http://EAA242.org > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html >
