Thanks Brian I would appreciate that, cheers warren zk-krj new zealand -----Original Message----- From: Brian Kraut [mailto:eng...@earthlink.net] Sent: Friday, 7 November 2003 12:02 p.m. To: KR builders and pilots Subject: Re: KR>FW: radair 360 vhf com
There are a lot of pinouts here http://www.aeroelectric.com/Installation_Data, but that radio is not. I recently got a Radair R250 transponder and have found out that the company was in business for a very short period of time and not many avionics shops have much data on their units. I never could find data on the transponder, but I believe the shop I went to did have data on the 360 VHF. I am bringing an RT-359A transponder back to the shop to have it checked out next week after some parts for it arrive. I will see if they can give me the pinouts for your radio if you don't have them by then. -----Original Message----- From: Warren Shapcott <warren.shapc...@onesource.co.nz> Sent: Nov 6, 2003 2:28 PM To: "'kr...@mylist.net'" <kr...@mylist.net> Subject: KR>FW: radair 360 vhf com Hi can someone please help me with this as I have had no response yet, have a nice day warren shapcott zk-krj new zealand -----Original Message----- From: Warren Shapcott Sent: Tuesday, 4 November 2003 7:57 a.m. To: 'kr...@mylist.net' Subject: radair 360 vhf com I have a radair 360 com transceiver which I would like to use in my kr2. Can anyone help me with the pin out connections as I would like to wire it up. Thanks Warren Shapcott new zealand ZK-KRJ _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html
