I am fairly certain that I am not the only one building a 2S to install the 33 rib on the spars before reading further (or remembering) to install the foam extensions. The foam extensions call for 2 layers of BID on both sides extended 2" onto the wood spars. (plan sheet W2)
I have removed the LE and TE of #33 so I can follow the plans. Because the outer wing foam is already in place between the spars and 5/8" square spruce gussets are T-88d in place, I really don't want to mess that up. Any thoughts about glassing the foam per plans but then put a fillet of thick micro or flox at the junction of the foam to rib and carry the glass onto the rib? One other question/thought. The 29 1/8 rib seems to be irrelevant. The plans show to radius the LE of the wing tip(which you could not do as shown on the plans with the rib installed as shown) and also to round the tip outer edges (again which you could not do with the ply rib there). Are you all not using this rib or just using a portion of it? Are you putting an additional 3 or 4 inches of foam beyond the rib and putting the radius and rounding here? Tim __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com
