Bill, heigth from the longeron to the top of the turtledeck at the point behind the back seat. I know everyone's may be a little different but I am interested in this for a couple reasons.
I just measured ours. Verticle from the top front edge of the shelf, it is 15" and measured from the shelf, along the line that the seat back takes from the front edge of the aft spar to the front edge of the shelf, it is 16 . This is measured in the center of the cockpit. 1) How much variation is there out there between heigths Probably not too much with the exception of a few that are special made for a tall person like Larry F. I think that the real difference is that on the stock KR, the T-Deck is very round, so all the height is in the center. Ours and many others have squared it off a little to take that height out to where your head is. 2) Does anybody have info about how much the heigth affects speed? I would suppose that this could be calculated for a standard KR, but so many other things affect the speed that it would be really hard to tell. In other words, I have never seen any such specs. 3) How does heigth affect rudder/elevator control... Again, I don't know that either, but I'll bet the answer is...... Pends. I am 5'9" and Jerry is around 5'11" and we both have plenty of room. First, get as much as you can from the seats and then take what you need and don't worry about it. N64KR Daniel R. Heath - Columbia, SC da...@kr-builder.org See you in Red Oak - 2003 See our KR at http://KR-Builder.org - Click on the pic See our EAA Chapter 242 at http://EAA242.org
