We thought long and hard about how we would go about installing the seat belt harnesses. All of the planning went into the shoulder harness, thinking that the lap belts would just attach to the eye bolts that were installed through the bottom of the spar. This is what we came up with. It is, by no means, the answer, because that would be to assume that there is an answer. We really should have given a lot more planning effort to the lap belts, because they were just as difficult. What made it so agonizing, is that it should have been a no-brainer. The last five pictures show our solution. We thought this would be the easy part, but think again. I agonized over this and tried several different brackets and made a mock up of one, only to find that none of them were satisfactory. This is the only solution that I could come up with that keeps the HARDware away from your butt and the elevator push tube travel. Click, to see the finished product, except for the pending patches to the wounds to the seats. http://kr-builder.org/SeatBelts/index.html
N64KR Daniel R. Heath - Columbia, SC da...@kr-builder.org See you in Red Oak - 2003 See our KR at http://KR-Builder.org - Click on the pic See our EAA Chapter 242 at http://EAA242.org
