I am finishing the installation of my HUD display in my Cessna 150. I found a A&E who will sign it off. It will be filled as a STC mod. I just finished the wiring harness and after its installed I will be flight testing it. Got to stay current you know. Here are some of the details.
Right Turn = Strobes, ON Left Turn + Becon, ON High beam = Landing Light, ON Oil = Low Oil Pressure , When ON Gas Pump = Fuel Valve open , When ON Temp = High Oil Temp , When ON Batt = Low Battery Voltage When ON Number = Air Speed Knots/Hr.analog, 0 to 199 k/h Cessna Panel Light dim knob controls HUD Lighting. Any on interested contact me. KRRon -------------- next part -------------- I am finishing the installation of my HUD display in my I found a A&E who will sign it off. It will be filled as a STC mod. I just finished the wiring harness and after its installed I will be are some of [3D"cid:001301c31837$ca80ea60$6501a8c0@Administration" ] Right Turn = Strobes, ON Left Turn + Becon, ON High beam = Landing Light, ON Oil = Low Oil Pressure , When ON Gas Pump = Fuel Valve open , When ON Temp = High Oil Temp , When ON Batt = Low Battery Voltage When ON Number = Air Speed Knots/Hr.analog, 0 to 199 k/h Cessna Panel Light dim knob controls HUD Lighting. Any on interested contact me. KRRon -------------- next part -------------- A non-text attachment was scrubbed... Name: Ronald R. Eason Sr..vcf Type: text/x-vcard Size: 792 bytes Desc: not available Url : http://mylist.net/private/krnet/attachments/20030511/dfb7f25a/RonaldR.EasonSr..vcf
