That was kind of what I was thinking too. It is too difficult to get in there sand and the integrity of the wood might be a concern as well. If I understand correctly , a hot iron should do the trick for removal ? Thanks Bob
----- Original Message ----- From: "Wayne via KRnet" <krnet@list.krnet.org> To: krnet@list.krnet.org Cc: "Wayne" <wdelisl...@carolina.rr.com> Sent: Wednesday, February 1, 2017 4:08:51 PM Subject: Re: KR> opinions on spars Bob, Those spars look to be water stained. If true, then the plywood would be suspect. The ply can be removed and replaced. Good luck, Wayne DeLisle Sr. > KR> opinions on spars. > > piney at mymts.net piney at mymts.net > Wed Feb 1 07:24:00 EST 2017 > HI All; > I tried to post some pictures of spars that I picked up in a parts buy and am > wondering about thoughts on cleaning these up for eventual use. > I have been sanding some and it seems to work fairly well but very tedious. > It does not seem like mould but I could be wrong, is this something anyone > has experience with? > These were not stored in a heated facility. > Here is a link to a video I took of them. https://youtu.be/tygecyU-nSA > > I have some other videos there as well taken from my Preceptor N3 and also my > Ultra Pup which is my current magic carpet. > Thanks > Bob R _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
