Larry,
Just a suggestion if you are going to balance the shaft
I would do the pistons & rods as well, a quick check to see how good they
are is to weigh all the pistons
they should be within a few grams, & weigh the rods they should be the
same, within a few grams
If the rods are different they may need end for end balancing,
Good luck
Robin
-----Original Message-----
From: Larry Flesner via KRnet
Sent: Tuesday, January 24, 2017 12:07 PM
To: krnet@list.krnet.org
Cc: Larry Flesner
Subject: KR> Progress !
I was unable to get my 5 inch prop extension off the crank with
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
