Hi all, On this note, I did the 8/32 pan head off-set; results to follow the next installation:
The next steps for the aileron attachment in the plans call for Flox the attachment nut, add the counter weight arm (middle), then 1 layer BID overlapping at least 1 inch. I've been stewing about this for a few weeks. I have wings built with Diehl skins raf48. It seems to me that I should flox or epoxy the 1/4" spar to the wing and to the aileron prior to BID. Did anyone do this? Then apply BID to further secure the aileron. Do I need to use a vacuum bag? Or can I use just gravity and hand placement (assuming I can square the spar with clamps)? Any feedback on process and results would be great! Thanks, Tucker Denver, CO _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
