Try the past news letters, Virg
On 8/19/2016 1:32 PM, Jim Litchfield via KRnet wrote:
> I am ready to cut the airfoil taper on the outer spars.
>
> Recently someone posted a link to a picture showing how they had built a
> jig setup to cut the taper using what appeared to be a wood rasp.
> Can anyone provide the link ?
>
> I have read Mark's site showing how he did it on a table saw and and I am
> inspired by his gutsy approach, however I am not so confident that I can
> duplicate the process without ruining some expensive wood not to mention
> the long hours of construction of the spars themselves.
>
> I have a table saw & a belt sander but would like to evaluate the slower
> hand method. I am sure the hand method is more time consuming but I can go
> slow with confidence. The faster methods are definitely faster but the
> mistakes can happen all too quickly.
>
> If anyone can provide the link or the builders name it would be much
> appreciated.
> I have searched the archives with no luck
>
> Thanks,
> Jim Litchfield
> S.E. Virginia
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
>
