This was a discussion a good many years ago, so I documented some tests to prove that you can install them in series. In fact, that is how they were installed on the Black Bird.
See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on the pics 2016 KR Gathering - Mt. Vernon, Ill. Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Paint at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior and Panel at 2008 - KR Gathering in Mt. Vernon, Il - MVN Daniel R. Heath - Lexington, SC -----Original Message----- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Craig Williams via KRnet Sent: Saturday, August 13, 2016 6:52 PM To: KRnet Cc: Craig Williams Subject: KR> Facet pumps in series Question Can you plumb 2 facet pumps in series and will each run the engine if the other fails. I have been trying to plumb them in parallel but its a real pain to get the tubing all bent correctly. Series would be much easier. It looks like the Zenith 601 was doing it at one time. Not sure they still are. Thanks. Craig <http://www.kr2seafury.com> www.kr2seafury.com <http://www.N1160Hminiplane.com> www.N1160Hminiplane.com _______________________________________________ Search the KRnet Archives at <http://tugantek.com/archmailv2-kr/search> http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to <mailto:KRnet-leave at list.krnet.org> KRnet-leave at list.krnet.org please see other KRnet info at <http://www.krnet.org/info.html> http://www.krnet.org/info.html see <http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
