I don't know, I've been debating abandoning the KR with all the discouraging comments about the VW based designs. All the other options are super expensive. Seems flying is for the rich.
On Thu, Jun 23, 2016 at 4:53 PM, Alastair Hawkins via KRnet < krnet at list.krnet.org> wrote: > I have removed the Force one hub by making a specialized puller. > > You copy the hub bolt pattern into a 1/4"thick steel sheet. > Remove the prop bolt and hub washer. > Take a socket and install the bolt thru it into the hub, then add another > socket so that it sticks out the front of the hub a 1/4". > For the 2nd socket I used the one used to remove the prop hub bolt. > Install the plate over the socket, adding 6 bolts thru to hub, tighten > them up to about 50 foot pounds each, make sure to tighten them evenly. > Then hit the plate in the center with a hammer, the hub will pop off and > will be prevented from falling on the floor by the hub bolt. > > I have used this technique twice to remove the hub. > > Al Hawkins > KR2 > Port Coquitlam BC. > Canada > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
