I used a Castle nut with cotter pin on the hinge points. You want then to rotate, so you don't want these too tight, but you also don't want them to loosen, so you have the cotter pin. True these can be hard to install. I have cut outs from the bottom to install, access and inspect. No one sees them below.
Rob Schmitt N1852Z -----Original Message----- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of stefkr2--- via KRnet Sent: Friday, May 13, 2016 11:32 AM To: Kr net Kr net <krnet at list.krnet.org> Cc: stefkr2 at kpnmail.nl Subject: KR> Elevator safety wire or? Hi kr friends, Whe are almost so far to install the elevator for final. What did you all do....is a locknut at the 3 hinge points enough?, should I work with loctite And a locknut or with a safetywire. The Safety wire or splitting pin is very hard to install. What do you all have? Thanks Stef -- Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2 _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
