Joe My dimensions are 132.5 and 26.5. With the o235, I wish I didn't move the firewall fwd. after a redo with the engine mount, all is well. Roger Baalman Rbaalman at cox.net
Sent from my iPhone > On Mar 11, 2016, at 6:22 PM, n357cj via KRnet <krnet at list.krnet.org> wrote: > > Hey guys, > just poking around again to see if I can get any more fuselage dimensions as > requested in the post below. I only have about 12 right now and that does not > get a very good data base going. It is a bit warmer now in most parts so take > a tape measure with you to the hanger and do the best you can even it is just > to the closest inch. > Thanks, > Joe Horton > > ----- Forwarded Message ---- > Subject: Re: KR> fuselage lengths > > Morning Folks, > I would like some more dimensions for the length of existing KR2 and KR2S > fuselages, (foreword face of main spar to back side of firewall and foreword > face of main spar to the intersection point of the tail post to fuselage > bottom) I have about 10 so far but I would like to get 3 or 4 times that many > to have a decent data base. ( I would like to hear from more of the overseas > guys... > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
