Joe
I forgot to mention that that I used the NACA 63009 airfoil and added six
inches per side to the elevator for a total width of seven (7) feet. The
vertical stab is an additional 4" taller and I used the NACA 63005 airfoil. The
wings are RAF 48 as I had the Diehl wing skins and the wing incidence is at 2
degrees instead of 3-1/2.
> To: n357cj at ptd.net; krnet at list.krnet.org
> Date: Sat, 13 Feb 2016 20:09:52 -0500
> Subject: KR> Fuselage dimensions for N729PK
> From: krnet at list.krnet.org48
> CC: pkengr at hotmail.com
>
> Joe
> I used all 14' of the longeron material from Wicks as suggested by Mark
> Langford. Mine measures 28" (2'4") to the front face of the firewall from the
> front face of the fwd spar. From the front face of the fwd spar to the aft
> face of the bottom of the stern post, I measured 141" (11'-9"). I added an
> addition bay to the fuselage. My fuselage is 4" wider than a std KR-2S. Of
> the additional length, 3" of it was added forward of the front spar, the rest
> is aft.
> Pete Klapp
>
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
