Dan, What you are looking for is are A286 Nutplates. They are made of Stainless Steel with Cad or Silver plating to avoid galling.
<http://www.spstech.com/fastener_finder/?action=parts_orig&cid=4&style=All&type=26&material=A286> Numerous suppliers are listed on the web site at <http://www.spstech.com/distributors/>. And yes, these are Aircraft grade. My experience with RivNuts is that you will eventually end up cutting off the stainless screw that gets galled in it and drilling out the rivnut. I won't use them in aircraft. -Jeff Scott Los Alamos, NM > Sent: Saturday, November 21, 2015 at 6:01 AM > From: "Dan Heath via KRnet" <krnet at list.krnet.org> > To: 'KRnet' <krnet at list.krnet.org>, 'CorvAircraft' <corvaircraft at > list.corvaircraft.org> > Cc: "Dan Heath" <danrh at windstream.net> > Subject: KR> Anchor Nuts/Blind Nuts/Nut Plates > > I need to find some of these that are not Magnetic. I need to use them in > an area near my magnetometer, where there can be no material that will draw > a magnet. > > > > The only thing I have been able to find is an aluminum countersink rivnut, > which is difficult to install and un-reliable as it can be easily dislodged > and will be very difficult to install a new one in its place. > > > > Your advise is appreciated. > > > > My Panther Building Documentation at <http://pantherbuilder.org/> > PantherBuilder Web Site > > > > Daniel R. Heath - Lexington, SC > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
