?Sid,?I don't know of anyone that has a position indicator other than full up or fall down and they do that with micro switches.
Paul ViskBelleville Il618-406-4705 -------- Original message --------From: Flesner via KRnet <krnet at list.krnet.org> Date: 11/16/2015 6:06 PM (GMT-05:00) To: KRnet <krnet at list.krnet.org> Cc: Flesner <flesner at frontier.com> Subject: Re: KR> Flap or Belly Board wiring >>? What do you use for a flap or belly board position indicator? >> >>Sid Wood >+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ I don't really have an indicator but use my amp meter to tell full up or full down.? My motor draws enough amps that the amp meter will dip when the motor is operation.? I have to hold my switch for "down" travel so when the amp meter returns to normal I know it's down.? Opposite for up travel.? I could use two LED's , one up, one down, and work them through my limit switches but I just haven't bothered to do it.? My amp gauge works well enough for me.? Another option might be a sliding potentiometer or similar to a light bar LED indicator.?? In operation my board is either down or up, no in between.? I'm guess flaps on a KR would be similar.? On an RV10 I installed a potentiometer that worked off the tube that worked the flaps and the "Skyview" software was calibrated to indicate the degree of deflection. As always, your results may vary............ Larry Flesner _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
