On Oct 2, 2015, at 20:19, T. W. Norman via KRnet <krnet at list.krnet.org> wrote:
<snip> Trevor; I mounted my comm/nav antenna just under the leading edge of the vertical stabilizer. The antenna consists of a straight piece of 1/16 copper rod pushed up through the foam. The ground plane is some aluminum tape attached to the turtle deck cowling just below the antenna connection at the bottom of the vertical stab. My transponder antenna is mounted on the bottom of the fuselage directly behind the seat and bolted through a 16 inch square sheet of thin aluminum glued to the floor of the fuselage. I have an Icom A-20 comm/nav and a Narco ATI50 transponder. Everything seems to work just fine. Parley Byington KR2 N54PB Henderson Nevada USA byington1954 at embarqmail.com > > I have a comm/nav antenna, and a transponder antenna. What have you guys > found was a good place to mount them? > > > > Thanks! > > > Trevor > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
