Good tip on the silicone...only tried it on the outer layer so I might be lucky.
https://sites.google.com/site/mykr2stretch/ https://sites.google.com/site/mykr2stretch/parts-for-sale On Aug 21, 2015 12:36 PM, "Dan Prichard via KRnet" <krnet at list.krnet.org> wrote: > If the nylon you're looking at is water or wind resistant then its coated > with silicone. Don't use that. Any fiberglass supply shop will have some > sort of peel ply. Prices vary. Tap Plastics, fiber lay, US composites etc. > I bought mine from a.s after picking up a few samples from local fabric > stores. The peel ply from a.s has worked the best for me and was cheaper. > Good luck > > Dan Prichard > > Sent from my iPhone > > > On Aug 21, 2015, at 8:32 AM, jon kimmel via KRnet <krnet at list.krnet.org> > wrote: > > > > I needed some dacron peel ply but didn't want to go to the trouble of > > buying from a.s. for just that. Figured out dacron was just a trade name > > for a particular nylon weave... went to my local hancock's fabric...found > > some nylon with a similar weave...couldn't tell the difference. > > > > https://sites.google.com/site/mykr2stretch/ > > https://sites.google.com/site/mykr2stretch/parts-for-sale > > _______________________________________________ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to > change options > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
