I used 3/32. It is plenty enough strong for the KR and its controls requirements.
Rob Schmitt N1852Z -----Original Message----- From: Bill Masquelier via KRnet <krnet at list.krnet.org> To: KR List <krnet at list.krnet.org> Cc: Bill Masquelier <billmasq at hotmail.com> Sent: Sat, Aug 8, 2015 9:41 am Subject: KR> Control cable size? Nowhere in the plans nor on the search can I find any reference to what size cable is used in the KR airplanes. Normally 1/8" cable is used in primary flight control systems but on both KR's that I have been familiar with there is 3/32" cable and 3/32 is WAY easier to use. Is there anything written that comments on the size needed? Thanks Bill Masquelier _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
