Bill, Although I can't tell you where it's at in the plans I can tell you that in the Aircraft Spruce catalog (2014-2015 edition) on page 21 at the top right section of the fiberglass cloth listing, look for the 5.85 oz. glass. Under the description it even lists it as being used on the KR aircraft. It's listed at $7.90 per yard. That's what I used on mine, although I've also used some carbon fiber cloth on some areas where I didn't want any flex, but wanted exceptional strength such as the seat bottom and the canopy frame. I found that a frame made of two layers of glass was just too flexible whereas carbon fiber with two layers was stiff as a board and really strong. Hope this helps. Just remember to look for the 5.85 oz. cloth with the thread count listed as 18 X 18.
E-mail me if there's any other information I can help with. Neal Hornung 4748 Zurmehly Rd. Lima, Ohio 45806 -----Original Message----- >From: Bill Masquelier via KRnet <krnet at list.krnet.org> >Sent: May 27, 2015 11:57 PM >To: KR List <krnet at list.krnet.org> >Cc: Bill Masquelier <billmasq at hotmail.com> >Subject: KR> Fiberglass weight > >I am working on restarting a stalled KR project and have a set of plans but >for the life of me I can't find the requirements for the fiberglass cloth. >Anyone tell me where the reference is in the plans? >Thanks >Bill Masquelier > >_______________________________________________ >Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. >To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org >please see other KRnet info at http://www.krnet.org/info.html >see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change >options
