GaryH wrote: > Where and how have some of you attached/installed seat belts and shoulder > harness?
One way to anchor the shoulder belts (a retrofit if you can't get any further back) is shown at http://www.n56ml.com/n891jf/harness/ , although N56ML's were cables wrapped around the two vertical stab spars and nicopressed, then Y'd out about three feet aft of the shoulders to capture both belts for each passenger. Seat belts on both planes are aluminum angles located on the aft face about 3/16" thick bolted through the upper aft spar cap. I bolted the belts to the angles (and cable eyes, in the case of the belts) with 5/16" bolts, just to match the seat belt's anchor points. Mark Langford ML at N56ML.com http://www.n56ml.com
