I assume one of those cables is for the choke. I removed the choke completely from my Zenith carb (and filled the hole made with a carb air temp sensor) and installed primer fittings in the intakes instead. It always started easy and one less thing that can go wrong and make the noise stop.
-------- Original Message -------- Subject: Re: KR> KRnet Digest, Vol 3, Issue 26 From: Sid Wood via KRnet <krnet at list.krnet.org> List-Post: krnet@list.krnet.org Date: Mon, January 26, 2015 12:16 pm To: <krnet at list.krnet.org> Removed the Zenith carburetor (4.5 hours) to build an adapter bracket for the throttle Bowden cable. The quest is to use a push-pull throttle knob mounted on the instrument panel instead of the lever mounted on the left sidewall. End goal is to get more cockpit space on the left side for me. Sid Wood Tri-gear KR-2 N6242 Mechanicsville, MD, USA _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
