I know that there are no official KR-1S plane, but I call it that way to signify that I plan to modify a KR-2S (plan is on order through Steve) to a single seater ------------------------------------------------ Hi James.
Do not be too hard on yourself, we know how you feel. The plans well explain how to set up the fuselage. You do not really need a jig, just a flat table long enough and wide enough to hold the fuselage plus tape measures, plumb bob and squares etc. Check out Mark L web page as you most likely have, HEAPS of info and listed to find. You would only need to work out how wide to want it and adjust the plan width to suit yourself if using the KR2s plans Good luck with it all. We can help if you need it. Phil Matheson Down under. _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
