Netters If you pull the hinge pin, reverse the leaf and re-install the pin, it lines up with the underside of the speed brake panel and doesn't require a shim on the other hinge leaf. I used 0.125 6061T6 aluminum for speed brake, 9x30", powered by a 6" linear actuator. Will deploy to appox. 80 degrees. Pete Klapp, building N729PK, Canton, Ohio
> To: flesner at frontier.com; krnet at list.krnet.org > Date: Sun, 14 Sep 2014 10:42:52 -0400 > Subject: Re: KR> belly board installation in N891JF > From: krnet at list.krnet.org > > Well, since we are doing belly boards ( speed brake ) here is another one. > I modeled this after Mark Jones' installation. > > http://krbuilder.org/BellyBoard/index.html > > > See N64KR at http://KRBuilder.org - Then click on the pics > > Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il ? MVN > Best KR at 2013 - KR Gathering in Mt. Vernon, Il ? MVN > Best Interior at 2013 - KR Gathering in Mt. Vernon, Il ? MVN > Best Paint at 2013 - KR Gathering in Mt. Vernon, Il ? MVN > Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il ? MVN > > Best Interior and Panel at 2008 ? KR Gathering in Mt. Vernon, Il - MVN > > > Daniel R. Heath - Lexington, SC > > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
