Paul I should have also mentioned that I used the brass tube inside another brass tube as my hinge. Not sure if the larger was 1/4" ID or OD, but I found two that slipped together perfectly with only a couple of thousands clearance like Ken's plans call for. I' they can find the correct pieces for you. If not, call me at 330-388-2074, I'll get them for you and mail them to you. Pete Klapp
> To: ppaulvsk at aol.com; krnet at list.krnet.org > Date: Tue, 29 Jul 2014 22:36:39 -0400 > Subject: Re: KR> Elevator trim hinge > From: krnet at list.krnet.org > > > > > > > > PaulContact AeroTech hobby shop, 902 N. Main, North Canton, OH 44720. > 330-499-1300.Pete Klapp, building N729PK,Canton, OH > > > Date: Tue, 29 Jul 2014 18:25:57 -0500 > > To: krnet at list.krnet.org > > Subject: KR> Elevator trim hinge > > From: krnet at list.krnet.org > > > > > > Does anyone have a source for some 1/4" tubing and the rod that goes into > > it for the hinge on the elivator trim tab. I"ve looked in some hobby > > stores. But all I can find is 5/32" with a rod that would fit into it. The > > plans call for 1/4". > > > > Paul Visk > > Belleville Il > > 618 406 4705 > > > > Sent on the new Sprint Network from my Samsung Galaxy S?4. > > _______________________________________________ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > options > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
